n compliance with (EU) 2016/425 Personal Protective Equipment (PPE) Regulation and CE marked.
EN ISO 20345 I E HRO SRA CI, EN 50321 Class 0, ASTM F1117 PPE, EN 13287 SRA SATRA TM144 certified.
The resistance of the hot contact is 300 (in 60 seconds) is 300?C.
Provides protection up to 20 kV for pre-loading over 8 hours and 35 kV protection on sole for 3 minutes.
FULL BOOTS
20 kV – No damage for 8 hours,
5 kV &lt, 5mA stray current,
THE SOLE
35 kV – No damage?for?3?minutes.

In compliance with (EU) 2016/425 Personal Protective Equipment (PPE) Regulation and CE marked.
EN 407, EN 388, ASTM 2675 certified.
ATPV &lt, 30 cal/cm2
Arc flash performance has a value of 51 cal/cm? according to ASTM 2675.
Resistant to 100?C contact heat.
The palm part has moderate breathability.
Contains small amounts of zinc organic accelerators.
Contains an elastic cuff band and a very small amount of polyester coated raw rubber.
Contains a chloroprene-Nitrile composite foam coating.
Has high quality flame retardant nitrile coating.
Has repellency against water and oil.
The glove is made of para-aramid lining, anti-static yarn, glass fiber and?elastic?fabric

SIZES FROM 36 TO 48
UPPER:
PVC with 8% Nitrile Rubber
LINING:
Polyester
SAFETY TOE CAP:
Steel, 200J
PIERCE RESISTANCE:
Stainless steel
OUTSOLE:
PVC with 8% nitrilie Rubber
MONDOPOINT?:
Natural?comfort?12

CHARACTERISTICS
This dispenser can be installed in a corridor to enter the production areas or
changing rooms, so that personnel are obliged to disinfect their hands.
It ensures perfect hygiene of the hands of workers and visitors if it is placed in a
required entry/outlet passage of production, being in compliance with the HACCP
standards.
– Fabrication : Stainless steel NF EN 1.4307 (AISI 304L) – sheet metal thickness
of 1.5 mm
– Supplied with :
* One removable stainless steel sheet holder (A4 format)
* One drip catcher (anti-drip receptacle)
* One padlock
– Suitable with all disinfection gels
– Great autonomy thanks to its 5 liters capacity (Can not supplied)
– Average dose delivered by the device : approximately 3 ml
– Not bulky = overall dimensions : width 350 x depth 422 x height 1172 mm
(including the sheet holder) or 1020 mm (without sheet holder)
– Weight : 6.50 kg ( without can )
OPTIONAL EQUIPMENT:
– Stainless steel protective casing for the back – BOBET code 70714 (sold
separately)
APPLICATION :
– Easy to use : One press on the pedal = one dose of product =&gt, No hands contact. Spout deported from the column to
avoid any contact when taking the product.
– Autonomous mechanical system
– No specific connection plugging
– Can be fixed?on?the?floor

? A self-retracting fall arrest device
? With guaranteed 20 meters of wire rope
?
? Equipped with our ESD (Extremity System Dissipator) absorption system.
? Suitable for user with a weight up to 150kg
? That works in both vertical and horizontal (edge certification) applications.
The latest innovation from Tractel in self-retracting fall arrest device.
? A simple and proven mechanism to optimise its operation and maintenance.
? In the event of fall, its ESD system ensures that the impact on the operator is less than 600 daN. Even if the operator falls when the wire rope is unwound.
? Ergonomic handle for easy handling during transport and installation.
? Lightweight thanks to its plastic housing.
? Smooth to use. The proven mechanism prevents the unintentional locking of the system.
? A reinforced spring which ensures a perfect winding of the entire wire rope.
? Impact-resistant and UV-resistant?housing

Fall arrest device with ESD technology, suitable for use on terrace roofs. 30 metre galvanised cable. High Capacity Range 150 kg. Complies with CNB/P/11.062
? Complies with EN 360 and VG11 CNB/P/11.060 standards for use on edges with a minimal 0.5 mm curve radius
? Can be used vertically or with a standard deviation of 20? in relation to vertical
? Can be used horizontally without the use of a lanyard between the end of the strap and harness
? Flexible unwinding system which doesn?t jerk during operator movement
? Responsive system which locks automatically in the event of a fall, reducing the total drop height
? Includes Energy System Dissipater (ESD) technology which enables the device to arrest a fall even when the webbing is fully unwound
? Integrated fall indicator
? Length 30 metres, galvanized cable version
? Lightweight
? ABS fibre reinforced polyamide housing
? Standard M47 swivel connector at end of?shock?absorber

all arrest device with ESD technology, suitable for use on terrace roofs. 1.8 meter webbing. High Capacity Range 150 kg. Complies with CNB/P/11.062.
? Complies with EN 360 and CNB/P/11.060 standards for use on edges with a minimal 0.5 mm curve radius
? Can be used vertically or with a standard deviation of 20? in relation to vertical
? Can be used horizontally without the use of a lanyard between the end of the strap and harness
? Flexible unwinding system which doesn?t jerk during operator movement
? Responsive system which locks automatically in the event of a fall, reducing the total drop height
? Includes Energy System Dissipater (ESD) technology which enables the device to arrest a fall even when the webbing is fully unwound
? Integrated fall indicator
? Length 1.8 metres, webbing version
? Lightweight
? ABS fibre reinforced polyamide housing
? Standard M47 swivel connector at end of?shock?absorber

EN795-C – CEN/TS16415
The new Travflex 2 lifeline is an evolution of the previous version. It complies with the European norm EN795-C and the CEN/TS16415 for multi-user.
As an extension of Tractel High Capacity Range, the Travflex 2 lifeline is now certified for user weighing up to 150kg including all their equipment.
This lifeline is certified for a simultaneous use for a maximum of 3 users 100kg or 2 users 150kg.
Intermediate anchors must be positioned no more than 15 meters apart.
Tractel has performed compatibility tests for all of its self-retracting fall arrester (EN360) and guided type fall arresters (EN353-2) rated 150kg on the Travflex 2 lifeline. All lanyards certified EN 355 can be used with the Travflex 2 lifeline.
Travflex 2 is the dedicated Tractel lifeline for light structure. Combined with the universal plate, it can be installed on a large range of light structures such as steel deck, sandwich panel and standing seem.
The Travflex 2 lifeline is certified for the following installation: on a wall, on an inclined surface up to 15? or on the ground.
The Travflex 2 lifeline advantages:
MEETS THE USER’S NEEDS:
? Choices of installations and uses (ergonomics).
? Automatic anchor crossing thanks to the travsmart slider.
? The user can work on either side of the lifeline without the need to disconnect (improved safety).
? Wire rope available in galvanized steel or stainless steel.
MEETS THE INSTALLER?S NEEDS:
? No special tools are required for the installation of the lifeline.
? Thanks to the wedge socket, the risk of the cable clamp nuts coming loose over time is fully eliminated.
? Quick and easy installation of the lifeline thanks to the design of the intermediate anchor.
? In the event of a fall, there is no need to fully dismantle the lifeline. Simply loosen the cable to remove and reinstall the failed intermediate supports (installation?time?reduced).

EN795-C – CEN/TS16415

The Travspring lifeline complies with European norms EN795-C and CEN/TS16415 for multi-user. It is certified for users weighing up to 150kg and allows simultaneous use for a maximum of 5 users at 100kg or 3 users at 150kg
When configured with one INRS absorber, intermediate anchors can be positioned from 1.8 to 28.5m. In a configuration with 2 INRS absorbers, intermediates must be positioned no more than 15 meters apart.
In single span configuration (without intermediate anchor), Tractel has certified the Travspring lifeline with a maximum distance between end anchors of 30m
MEETS THE USER’S NEEDS:
? Proximity lifeline
? Choices of installations and uses (ergonomics).
? The user can work on either side of the lifeline without the need to disconnect (improved safety).
? Wire rope available in galvanised steel or stainless steel.
MEETS THE INSTALLER?S NEEDS:
? No special tools are required for the installation of the lifeline.
? Thanks to the wedge socket, the risk of the cable clamp nuts coming loose over time is fully eliminated.
? Quick and easy installation of the lifeline thanks to the design of the intermediate anchor.
? In the event of a fall, there is no need to fully dismantle the lifeline. Simply loosen the cable to remove and reinstall the failed intermediate supports (installation?time?reduced).

UPPER: Grain leather, water repellent, high visibility insertsc
VAMP LINING: Breathable, abrasion resistant heat-sealed
QUARTER LINING: Breathable, abrasion resistance
SAFETY TOE CAP:
Non metallic polycarbonate
PIERCE-RESISTANCE: Textile pierced proof footbed
FOOTBED: Removable, cushioned, antistatic insole
OUTSOLE: PU + RUBBER HRO, Antislip sole, SRC
According?to?:?20345:2011